Eleaf GTL Coils
- Order on mon-fri before 23:30 for next day delivery
- Free delivery for orders above €75
- Discretely packaged and delivered
- Postpay options
- 5000+ customers rate us 9.4/10
Product Information
The Eleaf GTL Coils are made with Kanthal wire and organic cotton. The cotton used in these coils is untreated and free from bleaching or other chemicals. These coils are compatible with the Eleaf GTL system, but make sure to check the appropriate coil type for your specific e-cigarette model.
About the resistance
The GTL coils are available in different resistances. It's best to use these coils with an e-liquid containing a maximum of 70% VG. The inhalation style varies depending on the coil type, with the MTL coil providing a similar experience to traditional cigarettes, while the DTL coils are designed for direct lung inhales, similar to using a water pipe.
0.4 ohm
The 0.4 ohm GTL coil is a DTL coil designed for direct lung inhales. The manufacturer recommends vaping this coil between 20 and 30 watts.
0.8 ohm
The 0.8 ohm GTL coil is an MTL coil that simulates the inhalation style of a traditional cigarette. The manufacturer suggests vaping this coil between 12 and 18 watts.
1.2 ohm
The 1.2 ohm GTL coil is an MTL coil designed to mimic the inhalation style of a traditional cigarette. The manufacturer recommends vaping this coil between 7 and 13 watts.
About the coils
The GTL coils are made with Kanthal wire and organic cotton. They are not suitable for temperature control vaping. The use of organic cotton helps prevent any unwanted flavors, and the cotton is free from bleaching or chemical treatments.
The coils come in different resistances, and the inhalation style varies accordingly between DTL and MTL coils. Depending on usage, the coils should be replaced after 1 to 2 weeks. You may notice a decrease in flavor or a burnt taste after two weeks of use.
Using the Eleaf GTL Coils
To install a coil, simply press it into the bottom of the tank. Before using a new coil, it's recommended to prime it by applying a few drops of e-liquid onto the cotton. Once the cotton is saturated, fill the tank with e-liquid. Allow the tank to sit for about 5 minutes before using it.
When using a new coil, always start at a low wattage to prolong the coil's lifespan.
Specifications
Prima service en snel geleverd. Was een beetje huiverig door een paar slechte reviews. Maar gewoon volgens afspraak alles netjes geleverd👍🏻
Product als geadverteerd en geleverd zonder vertragingen. Duidelijke track and trace.