Justfog Q16 Starterset

The Justfog Q16 Starter Kit consists of a Justfog J-Easy 9 battery and a Justfog Q16 tank. This set is compact in size, making it easy to fit in your pocket. The vapor production and inhalation style closely resemble that of a traditional tobacco cigarette. If you're interested in purchasing a Justfog Q16 Starter Kit, continue reading for more information!

About the tank

The Q16 tank is included in the Justfog Q16 Starter Kit. It can hold up to 1.9ml of e-liquid. At the bottom of the tank, you'll find an airflow control ring that allows you to adjust the draw strength. The coils are located at the bottom of the tank. A spare glass is available for this model, which is convenient in case you accidentally drop the vape and break the glass. The top of the Q16 tank features a filter that prevents e-liquid from entering your mouth while vaping. The tank is finished with silver-colored stainless steel. The mouthpiece can be replaced with other drip tips.

About the coils

Two coils are included as standard. The coils for this kit are called "Organic Cotton Coils." These coils have a resistance of 1.6 ohm and are best vaped between 3.4 volts (6 watts) and 4.4 volts (12 watts); do not set the battery higher than the 6th dot from the bottom.

The cotton used for e-liquid absorption in the coils is organic cotton. Organic cotton means it is not bleached or treated with chemicals, which enhances the flavor! In addition to the included 1.6 ohm coils, there are also other coils available for this starter kit. Learn more about the available coils on the Justfog Organic Cotton Coils page. A coil typically lasts 1 to 2 weeks before needing replacement.

About the battery

The battery found in the starter kit is called the J-Easy 9 battery. With a capacity of 900mAh, the battery lasts approximately 1 day before needing to be recharged. The battery features two buttons that allow you to adjust the voltage in eight steps. The higher the voltage, the more vapor is produced, but it also depletes the e-liquid and battery more quickly. Charging is done via micro-USB. During charging, you can still use the battery. Note: Do not use USB adapters that charge faster than 1 ampere (sometimes indicated as 1000mAh). USB adapters that come with phones are often fast chargers, so avoid using them!

Using the Justfog Q16 Starter Kit

To start vaping, the tank must be attached to the battery. A coil must be placed inside the tank. Before placing the coil, it is advisable to moisten it slightly. Apply a few drops of e-liquid to all the white cotton areas on the sides of the coil. Then, insert the coil by screwing it into the bottom of the tank. Do not overtighten the coil; tighten it until it is snug. Fill the tank with e-liquid by unscrewing it and filling it up to the logo. Fill the tank between the middle tube and the glass, not in the center.

To turn the battery on or off, quickly press the fire button five times. The fire button is located above the screen. Press and hold the fire button to start vaping. Inhale slowly while keeping the fire button pressed, and release when you finish inhaling. The vape works best with e-liquids that contain no more than 60% VG.